Cisco Cisco Packet Data Gateway (PDG)
Troubleshooting
Detecting Faulty Hardware ▀
ASR 5500 System Administration Guide, StarOS Release 18 ▄
191
Checking the LEDs on the FSC
Each FSC is equipped with the following LEDs as shown in the accompanying figure:
Run/Fail
Active
Redundancy
Drive 1 Activity
Drive 2 Activity
Figure 12. FSC Status LEDs
The possible states for all FSC LEDs are described in the sections that follow.
FSC Run/Fail LED States
The FSC Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.