Cisco Cisco Packet Data Gateway (PDG)
System Interfaces and Ports
ATM Interfaces and Ports ▀
ASR 5000 System Administration Guide, StarOS Release 16 ▄
101
Notes:
The default framing type is SONET (Synchronous Optical Network) for an Optical (ATM) line card.
Setting the framing method is required to make the card operational.
Entering no shutdown makes the card active.
Creating an IP Interface for Use with an ATM Port
Use the following example to create an IP interface to use with ATM:
configure
context <ctxt_name>
interface <intf_name> point-to-point
ip address <ip_addr> <net_mask>
ip address <ip_addr> <net_mask> secondary
end
Notes:
The context must be the one in which you have or will configure the SGSN service.
You must enter the point-to-point keyword to create the PVC (Permanent Virtual Connection) interface for the
IP over ATM.
Configuring an ATM Port to Use an IP Interface
Use the following example to configure an ATM port to use with an IP interface:
configure
port atm <slot#>/<port#>
no shutdown
pvc vpi <vpi_num> vci <vci_num>
no shutdown
bind interface <ifc_name> <ctx_name>
end
Notes:
The context must be the one you used when creating the IP interface (PVC) for the ATM port.