Cisco Cisco Packet Data Gateway (PDG)
active-charging bandwidth-policy
Configures the bandwidth policy to be used for subscribers who use this APN.
Product
ACS
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
active-charging bandwidth-policy bandwidth_policy_name
{ default | no } active-charging bandwidth-policy [ fallback-enabled ]
{ default | no } active-charging bandwidth-policy [ fallback-enabled ]
default
Configures the default setting.
Default: The default bandwidth policy configured in the rulebase is used for subscribers who use this APN.
no
Disables bandwidth control for the APN.
bandwidth-policy bandwidth_policy_name
Specifies the bandwidth policy name. bandwidth_policy_name must be an alphanumeric string from 1 through
63 characters.
63 characters.
fallback-enabled
Determines whether policy under rulebase can be applied as a fallback value. Fallback is disabled by default.
Usage Guidelines
Use this command to configure bandwidth policy to be used for subscribers who use this APN.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1531
APN Configuration Mode Commands
active-charging bandwidth-policy