Cisco Cisco Packet Data Gateway (PDG)
ip qos-dscp
Configures the quality of service (QoS) differentiated service code point (DSCP) used when sending data
packets of a particular 3GPP QoS class over the Gi interface.
packets of a particular 3GPP QoS class over the Gi interface.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
ip qos-dscp { qci { 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 } { dscp } } +
default ip qos-dscp
no ip qos-dscp { qci { 1 | 2 | 3 | 4 | 5 { allocation-retention-priority { 1..3 } } | 6 { allocation-retention-priority
default ip qos-dscp
no ip qos-dscp { qci { 1 | 2 | 3 | 4 | 5 { allocation-retention-priority { 1..3 } } | 6 { allocation-retention-priority
{ 1..3 } } | 7 { allocation-retention-priority { 1..3 } } | 8 { allocation-retention-priority { 1..3 } } | 9 } } } +
default
Restores the APN IP parameters to the default setting conversational ef streaming af11 interactive af21
background be.
background be.
no
Restores the QoS parameter to its default setting.
allocation-retention-priority
Specifies the DSCP for interactive class if the allocation priority is present in the QoS profile.
allocation-retention-priority can be the integers 1, 2, or 3.
DSCP values use the following matrix to map based on traffic handling priority and Alloc/Retention priority
if the allocation priority is present in the QoS profile.
if the allocation priority is present in the QoS profile.
Following table shows the DSCP value matrix for allocation-retention-priority.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1625
APN Configuration Mode Commands
ip qos-dscp