Cisco Cisco Packet Data Gateway (PDG)
address-family vpnv6
Enters the IPv6 VPN Address Family configuraiton mode.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-bgp)#
Syntax Description
address-family vpnv6
address-family vpnv6
Enters the BGP Address-Family IPv6 VPN mode to allow entry of VPN BGP parameters.
Usage Guidelines
Use this command to configure the IPv6 VPN address family configuration parameters for BGP router. This
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
Use of the address-family vpnv6 command switches the command mode to BGP Address Family Configuration
Mode; the CLI prompt changes to:
Mode; the CLI prompt changes to:
[
context_name
>]
host_name
(config-bgp-af-vpnv6)#
Examples
Use the following command to enter the BGP Address-Family configuration mode for IPv6 VPN address
parameters:
address-family vpnv6
parameters:
address-family vpnv6
Command Line Interface Reference, Modes A - B, StarOS Release 19
1872
BGP Configuration Mode Commands
address-family vpnv6