Cisco Cisco Packet Data Gateway (PDG)
default
Restores the BITS port's default speed and communication mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > BITS Port Configuration
configure > port bits slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
default { mode | preferred slot }
mode
Default: none
Sets the default for the ports framing mode.
preferred slot
Default: non-revertive
Sets the port for non-revertive operation for port redundancy auto-recovery; requiring an administrative user
to manually issue a port switch command to return service to the original port.
to manually issue a port switch command to return service to the original port.
Usage Guidelines
Restores port-level parameters to their default values.
Examples
Use the following command to remove any setting for this port's framing mode:
default mode
default mode
Command Line Interface Reference, Modes A - B, StarOS Release 19
1904
BITS Port Configuration Mode Commands
default