Cisco Cisco Packet Data Gateway (PDG)

Seite von 2186
deactivate-predefined-rule
This command allows you to remove or deactivate the matched predefined rule/Group of Ruledefs (activated
by PCRF via Gx) that selected this action to ensure one time redirection for the subscriber.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-charging-action)#
Syntax Description
[ default | no ] deactivate-predefined-rule
default
Configures this command with its default setting.
Default: Disabled; same as no deactivate-predefined-rule
no
If previously enabled, disables the predefined rule in the current charging action.
Usage Guidelines
Use this command to ensure that the predefined rule/Group of Ruledefs gets deactivated after applying the
charging-action when configured. By default, the configuration is disabled. Static rules are not deactivated
by this command.
This feature is added in the ECSv2 to redirect traffic when quota for a user expires. When quota expires,
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is
RESOURCE_ALLOCATION_FAILURE.
The deactivation will apply only for predefined rules/Group of Ruledefs. If a static rule is associated with the
charging-action, it will not be deactivated.
   Command Line Interface Reference, Modes A - B, StarOS Release 19
314
ACS Charging Action Configuration Mode Commands
deactivate-predefined-rule