Cisco Cisco Packet Data Gateway (PDG)

Seite von 1630
• If MM T3346 timer value is configured in a Call-Control Profile then that value will override the back-off
timer values defined for this GPRS Service configurations.
T3350-timeout secs
Default: 6 seconds
Retransmission timer for Attach Accept/RAU Accept/P-TMSI Realloc Command.
secs must be an integer from 1 to 20.
T3360-timeout secs
Default: 6 seconds
Retransmission timer for Authentication Request.
secs must be an integer from 1 to 20.
T3370-timeout secs
Default: 6 seconds
Retransmission timer for Identity Request.
secs must be an integer from 1 to 20.
trau-timeout secs
Default: 30
Specifies the number of seconds the "old" 3G SGSN waits to purge the MS's data. This timer is started by the
"old" SGSN after completion of the inter-SGSN RAU.
secs : Must be an integer from 5 to 60.
Usage Guidelines
Use this command to set GMM timers.
Examples
Set the t3370 timer expiration for 15 seconds:
gmm t3370-timeout 15
   Command Line Interface Reference, Modes G - H, StarOS Release 19
996
GPRS Service Configuration Mode Commands
gmm