Cisco Cisco Packet Data Gateway (PDG)
threshold
Configures the minimum threshold value above which PGW-provided GTP-C load control information should
be utilized for calculating the PGW effective weight during initial node selection.
be utilized for calculating the PGW effective weight during initial node selection.
GTP-C Load Control Profile is a license-controlled feature. For more information, contact your Cisco
account or support representative.
account or support representative.
Important
Product
P-GW
S-GW
SAEGW
Privilege
Administrator, Security Administrator
Command Modes
Exec > Global Configuration > GTPC Load Control Profile Configuration
configure > gtpc-load-control-profile profile_name
Entering the above command results in the following prompt:
[local]
host_name
(config-gtpc-load-control-profile)#
Syntax Description
threshold percentage
[ no ] threshold
[ no ] threshold
threshold
Enables the configuration of the minimum threshold value above which PGW-provided load control information
should be utilized for calculating the P-GW effective weight during initial node selection.
should be utilized for calculating the P-GW effective weight during initial node selection.
percentage
Enter the threshold setting as a percentage of 100%. The entry must be an integer from 1 to 100. The default
setting is 50%.
setting is 50%.
no
Disables the configured threshold setting.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1088
GTPC Load Control Profile Configuration Mode Commands
threshold