Cisco Cisco Packet Data Gateway (PDG)
overload-control-handling
Enables/disables the handling of GTP-C overload control information for the node.
GTP-C Overload Control Profile is a license-controlled feature. For more information, contact your Cisco
account or support representative.
account or support representative.
Important
Product
P-GW
SAEGW
S-GW
Privilege
Administrator, Security Administrator
Command Modes
Exec > Global Configuration > GTPC Overload Control Profile Configuration
configure > gtpc-overload-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-gtpc-overload-control-profile)#
Syntax Description
[ no } overload-control-handling { home | visited }
no
Disables overload control information handling for this node.
overload-control-handling
Enables the handling of overload control information.
home
Specifies that the handling of overload control information will be enabled for the home PLMN.
visited
Specifies that the handling of overload control information will be enabled for the visited PLMN.
Usage Guidelines
Use this command to enable/disable the handling of overload control information for this node.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1101
GTPC Overload Control Profile Configuration Mode Commands
overload-control-handling