Cisco Cisco Packet Data Gateway (PDG)
policy null-username
Configures the current HA service to accept or reject an RRQ without an NAI extension.
This command is customer specific and license enabled.
Important
Product
HA
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ha-service)#
Syntax Description
policy null-username { accept-static | reject }
no policy null-username
no policy null-username
no
Set the HA back to the default behavior of rejecting an RRQ without an NAI extension.
accept-static
This enable the HA to accept an RRQ with a static (non-zero) home address request but without NAI extension,
when MN-AAA authentication is disabled at the HA. MN-NAI is required for MN-AAA authentication.
when MN-AAA authentication is disabled at the HA. MN-NAI is required for MN-AAA authentication.
reject
Default. This is the default behavior of rejecting an RRQ without an NAI extension.
Usage Guidelines
Use this command to enable or disable the HA from accepting an RRQ without an NAI.
Examples
The following command enables the current HA service to accept RRQs that do not have an NAI extension:
policy null-username accept-static
policy null-username accept-static
Command Line Interface Reference, Modes G - H, StarOS Release 19
1279
HA Service Configuration Mode Commands
policy null-username