Cisco Cisco Packet Data Gateway (PDG)
This command is instrumental in Iu-Flex functionality, whenever HNB-GW receives RESET/RESET-RES
messages from SGSN with Global CN-ID information element, the response from HNB-GW is sent to the
node configured for that particular Global CN-ID.
messages from SGSN with Global CN-ID information element, the response from HNB-GW is sent to the
node configured for that particular Global CN-ID.
If the RESET/RESET-RES messages do not have Global CN-ID IE, then the response of those messages is
directed to the default SGSN which is configured using sgsn point-code command in this mode.
directed to the default SGSN which is configured using sgsn point-code command in this mode.
Examples
The following command configures the PS core network identifier 101 with an SGSN point code 1.2.3:
map core-network-id 101 point-code 1.2.3
The following command configures the PS core network identifier 102 with the same SGSN point code 1.2.3:
map core-network-id 102 point-code 1.2.3
The following command configures the PS core network identifier 102 with the same SGSN point code 1.2.3:
map core-network-id 102 point-code 1.2.3
Command Line Interface Reference, Modes G - H, StarOS Release 19
1505
HNB-PS Network Configuration Mode Commands
map core-network-id