Cisco Cisco Packet Data Gateway (PDG)

bind

Binds the GGSN service to a logical IP interface serving as the Gn interface. Specifies the maximum number
of subscribers that can access this service over the interface.

Product

GGSN

Privilege

Security Administrator, Administrator

Command Modes

Exec > Global Configuration > Context Configuration > GGSN Service Configuration

configure > context context_name > ggsn-service service_name

Entering the above command sequence results in the following prompt:

[

context_name

]

host_name

(config-ggsn-service)#

Syntax Description

[ no ] bind { address ipv4_address [ ipv6-address ipv6_address ] | ipv4-address ipv4_address [ ipv6-address

ipv6_address ] | ipv6-address ipv6_address [ ipv4-address ipv4_address ] }

Removes a previously configured binding for the GGSN service.

address ipv4_address

Specifies the IP address (address) of the interface configured as the Gn interface. ipv4_address is specified
in IPv4 dotted-decimal notation.

ipv4-address ipv4_address

Specifies the IP address (address) of the interface configured as the Gn interface. ipv4_address is specified
in IPv4 dotted-decimal notation.

ipv6-address ipv6_address

Specifies the IP address (address) of the interface configured as the Gn interface. ipv6_address is specified
in IPv6 colon-separated hexadecimal notation.

Usage Guidelines

Used to associate or tie the GGSN service to a specific logical IP address. The logical IP address or interface
takes on the characteristics of a Gn interface. Only one interface can be bound to a service. The interface
should be configured prior to issuing this command.

Command Line Interface Reference, Modes G - H, StarOS Release 19

GGSN Service Configuration Mode Commands

bind