Cisco Cisco Packet Data Gateway (PDG)
plmn unlisted-sgsn
Configures the GGSN's policy for handling communications from SGSNs with which it is not configured to
communicate.
communicate.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ggsn-service)#
Syntax Description
plmn unlisted-sgsn [ foreign [ disable-gtpc-echo | rat-type { GAN | GERAN | HSPA | UTRAN | WLAN
} | reject-foreign-subscriber ] | home [ disable-gtpc-echo | rat-type { GAN | GERAN | HSPA | UTRAN
| WLAN } ] | mcc mcc_value mnc mnc_value [ disable-gtpc-echo | rat-type { GAN | GERAN | HSPA |
| WLAN } ] | mcc mcc_value mnc mnc_value [ disable-gtpc-echo | rat-type { GAN | GERAN | HSPA |
UTRAN | WLAN } | reject-foreign-subscriber ] | reject ]
default plmn unlisted-sgsn
default plmn unlisted-sgsn
default
Resets configured parameters to their default settings.
foreign
Default: Disabled
Specifies that the GGSN service accepts messages from SGSNs that are not configured within the service
using the sgsn address command.
using the sgsn address command.
This keyword also dictates that unlisted SGSNs are treated as if they belong to a foreign PLMN. Therefore,
PDP contexts originating from them are treated as visiting or roaming.
PDP contexts originating from them are treated as visiting or roaming.
home
Default: Disabled
Specifies that the GGSN service accepts messages from SGSNs that are not configured within the service
using the sgsn address command.
using the sgsn address command.
This keyword also dictates that unlisted SGSNs are treated as if they belong to the GGSN service's home
PLMN.
PLMN.
Command Line Interface Reference, Modes G - H, StarOS Release 19
61
GGSN Service Configuration Mode Commands
plmn unlisted-sgsn