Cisco Cisco Packet Data Gateway (PDG)
threshold total-ggsn-sessions
Configures alarm or alert thresholds for the total number of GGSN sessions across all the services in the
system.
system.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold total-ggsn-sessions high_thresh [ clear low_thresh ]
high_thresh
Default: 0 (Disabled)
Specifies the high threshold number of total GGSN sessions across all the sessions in the system that must
be met or exceeded within the polling interval to generate an alert or alarm.
be met or exceeded within the polling interval to generate an alert or alarm.
high_thresh is an integer from 0 through 4000000. A value of 0 disables the threshold.
clear low_thresh
Default: 0 (Disabled)
Specifies the low threshold number of total GGSN sessions that maintains a previously generated alarm
condition. If the number of GGSN sessions falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
condition. If the number of GGSN sessions falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
low_thresh is an integer from 0 and 4000000. A value of 0 disables the threshold.
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.
the system assumes it is identical to the high threshold.
Important
Usage Guidelines
Monitor and set alarms or alerts when the total number of GGSN sessions across all the services in the system
is equal to or greater than the set limit.
is equal to or greater than the set limit.
Command Line Interface Reference, Modes G - H, StarOS Release 19
918
Global Configuration Mode Commands (threshold ppp - url-blacklisting)
threshold total-ggsn-sessions