Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
The GPRS Service Configuration Mode is used within the context configuration mode to define the criteria
the SGSN needs to operate within a GPRS network. The GPRS Service works with other services, such as
SGSN GPRS Tunneling Protocol (see SGTP Service Configuration Mode Commands) and Mobile Application
Part (see MAP Service Configuration Mode Commands), to handle communication parameters required to
work with other network entities such as the base station subsystem (BSS).
the SGSN needs to operate within a GPRS network. The GPRS Service works with other services, such as
SGSN GPRS Tunneling Protocol (see SGTP Service Configuration Mode Commands) and Mobile Application
Part (see MAP Service Configuration Mode Commands), to handle communication parameters required to
work with other network entities such as the base station subsystem (BSS).
Command Modes
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gprs-service)#
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
and installed license(s).
Important
•
•
•
•
•
•
•
•
•
•
•
•
Command Line Interface Reference, Modes G - H, StarOS Release 19
963