Cisco Cisco Packet Data Gateway (PDG)
emergency-cscf
Enables the Emergency-CSCF for the service and enters the Emergency-CSCF Configuration Mode. Default
is disabled.
is disabled.
Product
SCM
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
[ no ] emergency-cscf
no
Disables the E-CSCF for the service.
Usage Guidelines
Use this command to enable the Emergency-CSCF feature and enter the Emergency-CSCF Configuration
Mode.
Mode.
Entering this command results in the following prompt:
[
context_name
]
hostname
(config-cscf-service-emergency-cscf)#
Emergency-CSCF Configuration Mode commands are defined in the CSCF Emergency-CSCF Configuration
Mode Commands chapter in this guide.
Mode Commands chapter in this guide.
Only one function (P-CSCF, S-CSCF, E-CSCF, SIP Proxy, or A-BG) can be enabled per service.
Important
Command Line Interface Reference, Modes C - D, StarOS Release 19
1540
CSCF Service Configuration Mode Commands
emergency-cscf