Cisco Cisco Packet Data Gateway (PDG)
mobility-protocol
This command allows you to configure the default mobility protocol type to be used for setting up a call when
the AAA server forwards an IP address directly.
the AAA server forwards an IP address directly.
Product
SaMOG
Privilege
Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
mobility-protocol { GTPv1 | GTPv2 | pmip }
default mobility-protocol
default mobility-protocol
default
Sets the mobility-protocol configuration to its default values.
Default (SaMOG 3G license): GTPv1
Default (SaMOG Mixed Mode license): GTPv2
Usage Guidelines
Use this command to configure the default mobility protocol type to be used for setting up a call when the
AAA server forwards an IP address directly. If the mobility protocol is also configured in the APN Profile
Configuration Mode, the value configured here will be overridden with the configured value in the APN
profile.
AAA server forwards an IP address directly. If the mobility protocol is also configured in the APN Profile
Configuration Mode, the value configured here will be overridden with the configured value in the APN
profile.
Examples
The following command configures mobility protocol to GTPv2:
mobility-protocol GTPv2
mobility-protocol GTPv2
Command Line Interface Reference, Modes C - D, StarOS Release 19
168
Call Control Profile Configuration Mode
mobility-protocol