Cisco Cisco Packet Data Gateway (PDG)
subscriber multi-device
Enable or disable the operator policy from allowing multiple PDN connections. When enabled, a maximum
of 11 PDN connections are allowed for a subscriber.
of 11 PDN connections are allowed for a subscriber.
Product
SaMOG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
[ no ] subscriber multi-device
no
If previously enabled, disables multiple PDN device connections for a subscriber.
Usage Guidelines
Use this command to enable or disable the operator policy from allowing multiple PDN connections for a
subscriber. If this optional configuration is not enabled, only one PDN connection is allowed for a subscriber.
subscriber. If this optional configuration is not enabled, only one PDN connection is allowed for a subscriber.
The SaMOG Web Authorization feature is license dependent. Contact your Cisco account representative
for more information on license requirements.
for more information on license requirements.
Important
Examples
The following command enables mutiple device connections for a subscriber:
subscriber multi-device
subscriber multi-device
Command Line Interface Reference, Modes C - D, StarOS Release 19
255
Call Control Profile Configuration Mode
subscriber multi-device