Cisco Cisco Packet Data Gateway (PDG)

Seite von 1952
tcp-keepalive
This command is TCP Keepalive timer. It is used to check liveness of Cell Broadcasting Centre. The CBS
service must be restarted after setting new values.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Syntax Description
tcp-keepalive idle-timeout idle_timeout_value max-retransmission-count count interval value
[ default | no ] tcp-keepalive
default
Restores the TCP Keepalive timer related values to default: idle-timeout(600 seconds),
max-retransmission-count (3) and interval ( 30 seconds).
no
Disables the TCP Keepalive timer.
tcp-keepalive idle-timeout
This is the time in seconds to wait before checking the liveness of Cell Broadcasting Centre. timeout_value
is an integer value between 60 and 7200.
max-retransmission-count
This is the number of attempts to check liveness of Cell Broadcasting Centre after idle time. count is an integer
value between 2 and 10.
interval
This is the time in seconds between attempts to check liveness of Cell Broadcasting Centre after idle time.
value is an integer value between 10 and 100.
Usage Guidelines
This command is used to check the liveness of Cell Broadcasting Centre.
Examples
The following command checks the liveness of Cell Broadcasting Centre with tcp-keepalive idle-timeout
as 66 seconds, max-retransmission-count as 5 and interval as 15:
tcp-keepalive idle-timeout 66 max-retransmission-count interval 15
   Command Line Interface Reference, Modes C - D, StarOS Release 19
334
CBS Service Configuration Mode Commands
tcp-keepalive