Cisco Cisco Packet Data Gateway (PDG)
attach restrict
Configures the system to restrict attaches based on access type and location areas (either all or specified
location area list) for this call control profile.
location area list) for this call control profile.
SGSN only: Before using this command, ensure that the appropriate location area code (LAC) information
has been defined via the location-area-list command.
has been defined via the location-area-list command.
Important
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
[ no ] attach restrict access-type { eps [ emm-cause-code code | imsi-attach-fail [ emm-cause-code code
] | voice-unsupported [ emm-cause-code code ] ] | gprs | umts } { all | location-area-list instance list_id }
] | voice-unsupported [ emm-cause-code code ] ] | gprs | umts } { all | location-area-list instance list_id }
no
Deletes the specified attach configuration.
access-type type
Defines the type of access to be allowed or restricted.
• eps
• gprs
• umts
emm-cause-code code
Specifies the EPS Mobility Management (EMM) cause code to return to the UE:
• eps-service-disallowed
Command Line Interface Reference, Modes C - D, StarOS Release 19
30
Call Control Profile Configuration Mode
attach restrict