Cisco Cisco Packet Data Gateway (PDG)
logging
Modifies the logging options for a specified system log server for the current context.
Product
All
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ no ] logging syslog ip_address [ event-verbosity { min | concise | full } ] [ facility facilities ] [ pdu-data
{ none | hex | hex-ascii } ] [ pdu-verbosity pdu_level ] [ rate value ]
{ none | hex | hex-ascii } ] [ pdu-verbosity pdu_level ] [ rate value ]
no
Indicates that internal logging is to be disabled for the options specified.
syslog ip_address
Specifies the IP address of a system log server on the network in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
event-verbosity { min | concise | full }
Specifies the level of detail to use in logging of events. Detail level must be one of the following:
• min: Displays minimal detail.
• concise:Displays summary detail.
• full: Displays full detail.
facility facilities
Default: local7
Specifies the local facility for which the system logging server's logging options shall be applied. Local facility
must be one of the following:
must be one of the following:
• local0
Command Line Interface Reference, Modes C - D, StarOS Release 19
786
Context Configuration Mode Commands I-M
logging