Cisco Cisco Packet Data Gateway (PDG)
ip local-port
Configures the local User Datagram Protocol (UDP) port for the R-P interfaces' IP socket.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
ip local-port number
default ip local-port
default ip local-port
number
Default: 699
Specifies the UDP port number.
number can be any integer value between 1 and 65535.
default
Designates UDP port, default value as 699.
Usage Guidelines
Specify the UDP port that should be used for communications between the Packet Control Function (PCF)
and the PDSN.
and the PDSN.
The UDP port setting on the PCF must match the local-port setting for the PDSN service on the system
in order for the two devices to communicate.
in order for the two devices to communicate.
Important
Examples
Use the following command to specify a UDP port of 3950 for the PDSN service to use to communicate with
the PCF on the R-P interface:
the PCF on the R-P interface:
iplocal-port 3950
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1566
PDSN Service Configuration Mode Commands
ip local-port