Cisco Cisco Packet Data Gateway (PDG)
ip
This command enables you to configure IP parameters for the current eWAG service.
Product
eWAG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ipsg-service-radius-server)#
Syntax Description
ip { gnp-qos-dscp | qos-dscp } qci { { { 1 | 2 | 3 | 4 | 9 } | { 5 | 6 | 7 | 8 } allocation-retention-priority { 1 | 2
| 3 } } { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | ef | pt } } +
default ip { gnp-qos-dscp | qos-dscp }
no ip { gnp-qos-dscp | qos-dscp } qci { { 1 | 2 | 3 | 4 | 9 } | { 5 | 6 | 7 | 8 } allocation-retention-priority { 1 |
no ip { gnp-qos-dscp | qos-dscp } qci { { 1 | 2 | 3 | 4 | 9 } | { 5 | 6 | 7 | 8 } allocation-retention-priority { 1 |
2 | 3 } } +
default
Configures this command, for specified option, with default setting for all QoS Class Identifier (QCI) values.
• QCI-based DSCP map:
◦qci 1: ef
◦qci 2: ef
◦qci 3: af11
◦qci 4: af11
◦qci 5: ef
◦qci 6: ef
◦qci 7: af21
◦qci 8: af21
◦qci 9: be
• ARP-based DSCP map for interactive class:
Command Line Interface Reference, Modes I - Q, StarOS Release 19
132
IPSG RADIUS Server Configuration Mode Commands
ip