Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Cisco
  4. Cisco Packet Data Gateway (PDG)

Cisco Cisco Packet Data Gateway (PDG)

Download
Seite von 1868
destination address
Configures the destination of the tunnelled packets for a manual tunnel.
Product
All
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Tunnel Interface Configuration > IPv6 to IPv4 Tunnel
Interface Configuration
configure > context context_name > interface interface_name tunnel > tunnel-mode ipv6ip
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-if-tunnel-ipv6ip)#
Syntax Description
destination address address
no destination address
no
Removes configuration for the specified keyword.
address
Specifies the IP address of the destination device. address must be specified in IPv4 dotted decimal or IPv6
colon-separated-hexadecimal notation.
Usage Guidelines
Use this command to configure the IP address of the destination end of the tunnel.
Examples
The following command sets the destination address for packets on this tunnelled interface to 10.2.3.4:
destination address 10.2.3.4
   Command Line Interface Reference, Modes I - Q, StarOS Release 19
292
IPv6 to IPv4 Tunnel Interface Configuration Mode Commands
destination address