Cisco Cisco Packet Data Gateway (PDG)

Seite von 1868
refresh-interval-percent
Configures percentage of the granted registration lifetime to be used in the refresh interval mobility option in
a binding acknowledgement message sent by the LMA service.
Product
P-GW
SAEGW
Privilege
Administrator
Syntax Description
refresh-interval-percent number
default refresh-interval-percent
default
Resets the command value to the default setting of 75.
number
Default: 75
Sets the percent value for session lifetimes for this service.
number must be an integer value from 1 to 99.
Usage Guidelines
Use this command to configure the amount of the granted registration lifetime to be used in the refresh interval
mobility option in the binding acknowledgement message sent by the LMA service to the requesting MAG.
Refreshing a binding or registration is based on the granted registration lifetime. Since a refresh request must
be within the granted range of a registration lifetime, this command provides a method of setting the interval
of when a refresh request is sent.
As described in RFC 3775 "Mobility Support in IPv6", if a binding refresh advice option is present in the
binding acknowledgement, the refresh interval field in the option must be a value less than the binding lifetime
(also returned in the binding acknowledgement). The mobile node then should attempt to refresh its registration
at the shorter refresh interval. The home agent will still honor the registration for the lifetime period, even if
the mobile node does not refresh its registration within the refresh period.
Refer to the refresh-advice-option and reg-lifetime commands for a complete understanding of registration
(binding) lifetimes and refresh intervals.
Important
   Command Line Interface Reference, Modes I - Q, StarOS Release 19
464
LMA Service Configuration Mode Commands
refresh-interval-percent