Cisco Cisco Packet Data Gateway (PDG)
lac
Configures a 3G location area code (LAC) or area codes where a UE, associated with this LTE policy, is
restricted from participating in a handover scenario.
restricted from participating in a handover scenario.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration > LTE
Forbidden Location Area Configuration
Forbidden Location Area Configuration
configure > lte-policy > ho-restrict-list list_name > forbidden location-area plmnid plmn_id
Entering the above command sequence results in the following prompt:
[local]
host_name
(forbidden_la)#
Syntax Description
[ no ] lac { area_code } +
no
Removes a configured forbidden handover area code or area codes from this policy. If no location area code
is specified, then all location area codes are removed.
is specified, then all location area codes are removed.
area_code
Specifies an area code or area codes from which UEs are restricted from participating in a handover as an
integer from 0 through 65535. Multiple area codes can be entered (up to 128 in a single line, separated by
spaces).
integer from 0 through 65535. Multiple area codes can be entered (up to 128 in a single line, separated by
spaces).
Usage Guidelines
Use this command to configure 3G location-based area codes that will be forbidden to UEs associated with
this LTE policy.
this LTE policy.
Examples
The following command configures eight location-based area codes (1, 2, 3, 4, 5, 6, 7, 8) where a UE, associated
with this LTE policy, is restricted from participating in a handover scenario:
lac 1 2 3 4 5 6 7 8
with this LTE policy, is restricted from participating in a handover scenario:
lac 1 2 3 4 5 6 7 8
Command Line Interface Reference, Modes I - Q, StarOS Release 19
600
LTE Forbidden Location Area Configuration Mode Commands
lac