Cisco Cisco Packet Data Gateway (PDG)
tac-range
Defines a range of IMEI-TAC values to be included in a IMEI-TAC group which will be used as criteria for
operator policy selection.
operator policy selection.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > LTE Policy Configuration > IMEI-TAC-Group
configure > lte-policy > imei-tac-groupgroup_name
Entering the above command sequence results in the following prompt:
[
local
]
host_name
(imei-tac-group)#
Syntax Description
[ no ] tac-range from start_tac_value to end_tac_value
no
Removes the identified TAC range from the IMEI-TAC group configuration.
start_tac_value to end_tac_value
tac_value - Specifies the 8-digit number that identifies a specific "type allocation code". The start TAC is
the first TAC in the range. The end TAC is the last TAC in the range.
the first TAC in the range. The end TAC is the last TAC in the range.
Usage Guidelines
Use this command to enter up to 20 IMEI-TAC value ranges. Ranges can be overlapping.
The TAC, the first eight digits of the 15-digit IMEI or 16-digit IMEI-SV, identifies the equipment manufacturer,
the wireless device type and the model number (if there is one); for example, TAC of 35201906 identifies an
Apple mobile phone. Defining ranges would enable carriers to select operator policies for call handling based
on multiple device types.
the wireless device type and the model number (if there is one); for example, TAC of 35201906 identifies an
Apple mobile phone. Defining ranges would enable carriers to select operator policies for call handling based
on multiple device types.
Examples
The following command defines a TAC range to be added to the IMEI-TAC group:
tac-range from 23456789 to 23456889
tac-range from 23456789 to 23456889
Command Line Interface Reference, Modes I - Q, StarOS Release 19
41
IMEI-TAC-Group Configuration Mode Commands
tac-range