Cisco Cisco Packet Data Gateway (PDG)
associate
Associates or disassociates a Stream Control Transmission Protocol (SCTP) parameter template with the SGs
service.
service.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME SGs Service Configuration
configure > context context_name > sgs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-sgs-service)#
Syntax Description
associate sctp-param-template template_name
no associate sctp-param-template
no associate sctp-param-template
no
Removes the SCTP parameter template association.
template_name
Associates an SCTP parameter template with the SGs service.
template_name specifies the name for a pre-configured SCTP parameter template to associate with this SGs
service as an alphanumeric string of 1 through 63 characters. For more information on the SCTP parameter
template, refer to the sctp-param-template command in the Global Configuration Mode Commands chapter
and the SCTP Parameter Template Configuration Mode Commands chapter.
service as an alphanumeric string of 1 through 63 characters. For more information on the SCTP parameter
template, refer to the sctp-param-template command in the Global Configuration Mode Commands chapter
and the SCTP Parameter Template Configuration Mode Commands chapter.
Usage Guidelines
Use this command to associate a pre-configured SCTP parameter template with the SGs service.
This is a critical configuration. Any change to this configuration will cause the SGs service to restart.
Caution
If no SCTP parameter template is specified, all default settings for the configurable parameters in the
SCTP Parameter Template Configuration Mode apply.
SCTP Parameter Template Configuration Mode apply.
Important
Command Line Interface Reference, Modes I - Q, StarOS Release 19
828
MME SGs Service Configuration Mode Commands
associate