Cisco Cisco Packet Data Gateway (PDG)
local-cause-code-mapping gw-unreachable
Configures the reject cause code to send to a UE when a gateway (S-GW or P-GW) does not respond during
an EMM procedure.
an EMM procedure.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
local-cause-code-mapping gw-unreachable emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed } [ attach [ tau ] | tau [ attach ]
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed } [ attach [ tau ] | tau [ attach ]
] | { no-bearers-active tau }
default local-cause-code-mapping gw-unreachable [ attach | tau ]
default local-cause-code-mapping gw-unreachable [ attach | tau ]
Returns the cause code mapping to its default value: #19 - ESM Failure cause code for Attach procedures,
and no-bearers-active- #40 - NO-EPS-BEARER-CONTEXT-ACTIVATED for TAU procedures.
and no-bearers-active- #40 - NO-EPS-BEARER-CONTEXT-ACTIVATED for TAU procedures.
gw-unreachable emm-cause-code { eps-service-not-allowed-in-this-plmn | network-failure |
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a gateway does not respond.
• eps-service-not-allowed-in-this-plmn
• network-failure
• no-bearers-active
• no-suitable-cell-in-tracking-area
• plmn-not-allowed
• roaming-not-allowed-in-this-tracking-area
• tracking-area-not-allowed
Command Line Interface Reference, Modes I - Q, StarOS Release 19
906
MME Service Configuration Mode Commands
local-cause-code-mapping gw-unreachable