Cisco Cisco Packet Data Gateway (PDG)
local-cause-code-mapping sgw-selection-failure
Configures the reject cause code to send to a UE when a failure occurs during S-GW selection.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
local-cause-code-mapping sgw-selection-failure emm-cause-code { eps-service-not-allowed-in-this-plmn
| network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
default local-cause-code-mapping sgw-selection-failure
default local-cause-code-mapping sgw-selection-failure
default local-cause-code-mapping sgw-selection-failure
Returns the cause code mapping to its default value: network-failure.
sgw-selection-failure emm-cause-code { eps-service-not-allowed-in-this-plmn | network-failure |
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a failure occurs during S-GW
selection.
selection.
• eps-service-not-allowed-in-this-plmn
• network-failure - Default
• no-suitable-cell-in-tracking-area
• plmn-not-allowed
• roaming-not-allowed-in-this-tracking-area
• tracking-area-not-allowed
Command Line Interface Reference, Modes I - Q, StarOS Release 19
924
MME Service Configuration Mode Commands
local-cause-code-mapping sgw-selection-failure