Cisco Cisco Packet Data Gateway (PDG)

policy attach

Configures parameters for the UE Attach procedure.

Product

MME

Privilege

Administrator

Command Modes

Exec > Global Configuration > Context Configuration > MME Service

configure > context context_name > mme-service service_name

Entering the above command sequence results in the following prompt:

[

context_name

]

host_name

(config-mme-service)#

Syntax Description

policy attach { imei-query-type { imei | imei-sv | none } [ verify-equipment-identity [ allow-on-eca-timeout

| deny-greylisted | deny-unknown | verify-emergency ] ] | reject-non3gpp-char-apn | set-ue-time { disable

| enable [ prefer-mme | prefer-msc ] }

default policy attach { imei-query-type | reject-non3gpp-char-apn | set-ue-time }

default

Returns the command to its default setting. Default values are:

imei-query-type: none

reject-non3gpp-char-apn: Reject Attach request with non-3GPP character APN

set-ue-time: disabled

imei-query-type { imei | imei-sv | none }

Configures the IMEI query type for UE attach.

• imei: Specifies that the MME is required to query the UE for its International Mobile Equipment Identity

(IMEI).

• imei-sv: Specifies that the MME is required to query the UE for its International Mobile Equipment

Identity - Software Version (IMEI-SV).

• none: Specifies that the MME does not need to query for IMEI or IMEI-SV.

Command Line Interface Reference, Modes I - Q, StarOS Release 19

959

MME Service Configuration Mode Commands

policy attach