Cisco Cisco Packet Data Gateway (PDG)
interface-type
Configures the interface type used by this service.
Product
ePDG
MME
P-GW
SAEGW
S-GW
SaMOG
SGSN
Prior to release 16, the SGSN only supported this command on the ASR 5000 platform.
Important
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > eGTP Service Configuration
configure > context context_name > egtp-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-egtp-service)#
Syntax Description
interface-type { interface-cgw-egress | interface-epdg-egress | interface-mme | interface-pgw-ingress [
s2a ] [ s2b ] | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
s2a ] [ s2b ] | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
{ interface-cgw-egress | interface-epdg-egress | interface-mme | interface-pgw-ingress [ s2a ] [ s2b ] |
interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
interface-cgw-egress: Specifies the SaMOG Gateway's EGTP interface for egress.
interface-epdg-egress: Specifies that the interface has the characteristics of an ePDG's egress EGTP interface.
interface-mbms-egress: This keyword is for future development.
interface-mme: Specifies that the interface has the characteristics of an eGTP MME S11 reference point
to/from an S-GW or an eGTP MME Sv reference point to/from a Mobile Switching Center (MSC).
to/from an S-GW or an eGTP MME Sv reference point to/from a Mobile Switching Center (MSC).
Command Line Interface Reference, Modes E - F, StarOS Release 19
72
eGTP Service Configuration Mode Commands
interface-type