Cisco Cisco Packet Data Gateway (PDG)
show ip as-path-access-list
Displays the contents of a Border Gateway Protocol (BGP) router Autonomous System (AS) path access list
in the current context.
in the current context.
Product
HA
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip as-path-access-list list_name [ | { grep grep_options | more } ]
list_name
Specifies the name of an existing AS path access list configured in the current context as an alphanumeric
string of 1 through 79 characters.
string of 1 through 79 characters.
| { grep grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to display the configured entries for the specified BGP router AS path access list in the
current context.
current context.
Examples
The following command displays the contents of an AS path access list named ASlist1:
show ip as-path-access-list ASlist1
show ip as-path-access-list ASlist1
Command Line Interface Reference, Modes E - F, StarOS Release 19
1188
Exec Mode show Commands (H-L)
show ip as-path-access-list