Cisco Cisco Packet Data Gateway (PDG)
show nw-reachability server
Displays the configuration of network reachability servers for the current context.
Product
HA
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show nw-reachability server { all | ipv4-only |ipv6-only | name server_name }
all
Displays configuration information for all network reachability servers in the current context.
ipv4-only
Displays IPv4 Network Reachability Detection servers.
ipv6-only
Displays IPv6 Network Reachability Detection servers.
name server_name
Displays configuration information for an existing network reachability server specified as an alphanumeric
string of 1 through 15 characters.
string of 1 through 15 characters.
Usage Guidelines
Use this command to display configuration information on network reachability servers configured in the
current context.
current context.
Examples
The following command displays information on all network reachability servers in the current context:
show nw-reachability server all
show nw-reachability server all
Command Line Interface Reference, Modes E - F, StarOS Release 19
1351
Exec Mode show Commands (M-P)
show nw-reachability server