Cisco Cisco Packet Data Gateway (PDG)

Seite von 1824
dhcp force
Tests the lease-renewal for DHCP-assigned IP addresses for a particular subscriber.
Product
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
dhcp force lease-renewal { callid id | imsi imsi [ nsapi nsapi ] | msid msid }
callid id
Clears the call ID specified as a 4-byte hexadecimal number.
imsi msid
Disconnects the subscriber with the specified msid. The IMSI (International Mobile Subscriber Identity) ID
is a 50-bit field which identifies the subscriber's home country and carrier. Wildcard characters $ and * are
allowed. The * wildcard matches multiple characters and the $ wildcard matches a single character. If you do
not want the wildcard characters interpreted as a wildcard enclose them in single quotes ( ' ). For example;
'$'.
nsapi nsapi
Specifies a Network Service Access Point Identifier (NSAPI) an integer from 5 to 15.
msid id
Disconnects the mobile user identified by ms_idms_id must be from 7 to 16 digits specified as an IMSI,
MIN, or RMI. Wildcard characters $ and * are allowed. The * wildcard matches multiple characters and the
$ wildcard matches a single character. If you do not want the wildcard characters interpreted as a wildcard
enclose them in single quotes ( ' ). For example; '$'.
   Command Line Interface Reference, Modes E - F, StarOS Release 19
520
Exec Mode Commands (D-S)
dhcp force