Cisco Cisco Packet Data Gateway (PDG)
sgs vlr-failure
This command configures the MME to monitor all VLRs and perform a controlled release (detach) of affected
UEs when any VLR becomes unavailable.
UEs when any VLR becomes unavailable.
Product
MME
Privilege
Security Administrator, Administrator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
[no] sgs vlr-failure sgs-service sgs_svc_name duration minutes backoff-timer seconds [ -noconfirm ]
no
Resets the command to its default setting of disabled.
sgs-service sgs_svc_name
Specifies the SGs service to which the VLR belongs.
sgs_svc_name specifies the name of a pre-configured SGs service.
duration minutes
Specifies the amount of time in minutes during which all qualifying UEs will be detached.
The MME splits this duration into n intervals, 5 seconds apart. A maximum of 50 subscribers are processed
per interval. For example, a setting of 2 minutes with 100 subscribers would result in the MME processing
all subscribers in the first 2 intervals (10) seconds. Any subscribers remaining at the expiry of the duration
will not be processed.
per interval. For example, a setting of 2 minutes with 100 subscribers would result in the MME processing
all subscribers in the first 2 intervals (10) seconds. Any subscribers remaining at the expiry of the duration
will not be processed.
minutes must be an integer from 1 through 3000.
backoff-timer seconds
Specifies the period of time the MME will wait following the detection of a VLR condition before starting
the controlled release of affected UEs.
the controlled release of affected UEs.
seconds must be an integer from 1 to 3000.
Command Line Interface Reference, Modes E - F, StarOS Release 19
672
Exec Mode Commands (D-S)
sgs vlr-failure