Cisco Cisco ASR 5000

Seite von 9109
Context Configuration Mode Commands E-H   
▀  gtpp attribute 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
2462 
   
plmn-id [ unknown-use ]
 
Default: Enabled 
For SGSN, reports the SGSN PLMN Identifier value (the RAI) in the S-CDR provided if the dictionary 
supports it. 
For GGSN, reports the SGSN PLMN Identifier value (the RAI) in the G-CDR if it was originally provided by 
the SGSN in the GTP create PDP context request. It is omitted if the SGSN does not supply one. 
Normally when SGSN PLMN-id information is not available, the attribute sgsnPLMNIdentifier is not 
included in the CDR. This keyword enables the inclusion of the sgsnPLMNIdentifier with a specific value 
when the SGSN PLMN-id is not available. 
unknown-use
 
hex_num
: is aa hexadecimal number from 0x0 through 0xFFFFFF that identifies a foreign 
SGSN that has not provided a PLMN-id. For GGSN only. 
qos max-length
 
Default: Disabled 
Specifying this option will change the parameters related to QoS sent in S-CDR and SaMOG CDR. The 
max-
length
 option is used to modify the length of QoS sent in CDR. The 
qos_value
 must be an integer from 4 
through 24. 
This feature is introduced to support Rel.7+ QoS formats. 
rat
 
Default: Enabled 
For SGSN: includes the RAT (identifies the radio access technology type) value in the S-CDR. 
For GGSN: includes the RAT (identifies the radio access technology type) value in the G-CDR. 
recordextension
 
Default: Disabled 
This keyword controls the inclusion of the optional field “RecordExtension” in the x-CDRs.  
record-extensions rat
 
Default: Disabled 
Enables network operators and/or manufacturers to add their own recommended extensions to the CDRs 
according to the standard record definitions from 3GPP TS 32.298 Release 7 or higher. 
record-type { sgsnpdprecord | sgwrecord }
 
Important:
  This keyword is available only when the SaMOG Mixed Mode license (supporting both 3G and 4G) 
is configured.  
Default: sgwrecord 
Specifies the SaMOG CDR type to use.  
For an SaMOG 3G license, this keyword will not be available. However, sgsnpdprecord type will be used as 
the default record type. 
served-mnai
 
Default: Disabled 
This keyword controls the inclusion of the optional field “Served MNAI” in the x-CDRs.