Cisco Cisco ASR 5000
Global Configuration Mode Commands (A-K)
congestion-control threshold max-sessions-per-service-utilization ▀
Command Line Interface Reference, StarOS Release 18 ▄
5353
Usage
Use this command to set the critical, major and minor threshold levels of maximum sessions per service as a
percentage measured in real-time. This threshold is based on the maximum number of sessions or PDP
contexts configured for the a particular service. (Refer to the
percentage measured in real-time. This threshold is based on the maximum number of sessions or PDP
contexts configured for the a particular service. (Refer to the
bind
command for the PDSN, GGSN, SGSN,
or HA services.)
Thresholds dictate the conditions for which congestion control is to be enabled and establish limits for
defining the state of the system (congested or clear). When these thresholds are crossed, an SNMP trap is
generated (starCongestion) and, if configured, a congestion action-profile is invoked as well.
This command requires a valid product license.
Thresholds dictate the conditions for which congestion control is to be enabled and establish limits for
defining the state of the system (congested or clear). When these thresholds are crossed, an SNMP trap is
generated (starCongestion) and, if configured, a congestion action-profile is invoked as well.
This command requires a valid product license.
Example
The following command configures a minor threshold level of 25%.
congestion-control threshold max-sessions-per-service-utilization minor
25
25
This setting will remain in configuration unless you specify another minor threshold level in place of 25.
The following command returns the critical, major, and minor thresholds levels to their default values:
The following command returns the critical, major, and minor thresholds levels to their default values:
default congestion-control threshold max-sessions-per-service-utilization