Cisco Cisco ASR 5000
SGSN Service Configuration Mode Commands
▀ core-network
▄ Command Line Interface Reference, StarOS Release 18
8638
core-network
This command specifies the numeric ID for a core network to identify which CN is to be used by the SGSN service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGSN Service Configuration
configure > context context_name > sgsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgsn-service)#
Syntax
core-network id cn_id
no core-network id
no
Removes the currently configured core network ID from the current SGSN configuration.
id
cn_id
This number identifies the core network to connect the SGSN service.
cn_id
: Must be an integer from 0 through 4095.
Usage
Use this command to set a global ID to identify this SGSN in the core network.
Example
The following command sets the core network ID for the current SGSN service to 127:
core-network id 127