Cisco Cisco ASR 5000
Subscriber Configuration Mode Commands
▀ mobile-ipv6
▄ Command Line Interface Reference, StarOS Release 18
8902
mobile-ipv6
Configures Mobile IPv6 related parameters for a subscriber.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ default | no ] mobile-ipv6 { home-address ipv6_address | home-agent ipv6_address |
home-link-prefix ipv6_address | tunnel mtu value }
home-link-prefix ipv6_address | tunnel mtu value }
default
Disables the support for sending call correlation information NVSEs to the HA in MIP RRQ.
This is the default mode.
This is the default mode.
no
Removes the configured support for sending call correlation information.
home-address ipv6_address
Specifies the home address for the subscriber.
ipv6_address
must be entered using IPv6 colon-separated-
hexadecimal notation.
home-agent ipv6_address
Specifies the IPv6 address of the mobile IP user’s home agent.
ipv6_address
must be entered using IPv6
colon-separated-hexadecimal notation.
home-link-prefix ipv6_address
Specifies the IPv6 address of the mobile IP user’s home link.
ipv6_address
must be entered using IPv6
colon-separated-hexadecimal notation.
tunnel mtu value
Configures the tunnel MTU (in bytes) for the IPv6 tunnel between the HA and the mobile node.
value
must
be an integer from 1024 through 2000. The default is 1500.