Cisco Cisco ASR 5000
Context Configuration Mode Commands I-M
▀ ipne-service
▄ Command Line Interface Reference, StarOS Release 18
2590
ipne-service
Create and/or configure an IPNE service.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name] host_name (config)#
Syntax
[ no ] ipne-service ipne_service
no
Included as a prefix of the command,
no
causes the system to disable IPNE service when it has been created
with this command and removes the IPNE service definition from the MME’s configuration.
ipne_service
Enter 1 to 63 alphanumeric characters to create a unique name for an IPNE service instance.
Usage
This command creates an instance of an IPNE service in the context.It is recommended that the IPNE Service
be configured in the same context in which the MME Service has been configured.
This command also accesses the commands in the IPNE service configuration mode to configure the IPNE
service.
If an IPNE service is to be removed and the service has active handles, then the handles are deleted using a
timer-based approach and then the IPNE service is removed.
be configured in the same context in which the MME Service has been configured.
This command also accesses the commands in the IPNE service configuration mode to configure the IPNE
service.
If an IPNE service is to be removed and the service has active handles, then the handles are deleted using a
timer-based approach and then the IPNE service is removed.
Example
Create an IPNE service called
IPNEserv1
:
ipne-service IPNEserv1
Use a command similar to the following to disable and remove the IPNE service configuration for the IPNE
service called
service called
ipneserv.
no ipne-service ipneserv