Cisco Cisco ASR 5000
SGSN Global Configuration Mode Commands
▀ old-tlli hold-time
▄ Command Line Interface Reference, StarOS Release 18
8566
old-tlli hold-time
This command configures the old-TLLI expiry timer to be started in GMM when anyone of the listed random TLLI are
received.
received.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
[ default ] old-tlli hold-time < seconds >
default
Resets the timer to 5 seconds
< seconds >
Sets the numbers of seconds before the timer expires; range 1 to 125.
Usage
Use this command to configure the old-TLLI expiry timer to be started in GMM when anyone of the listed
random TLLI are received. If the timer expires prior to receiving Attach-Complete then the SGSN invalidates
(removes) the TLLI from the GMM.
random TLLI are received. If the timer expires prior to receiving Attach-Complete then the SGSN invalidates
(removes) the TLLI from the GMM.
Important:
For this configuration to work, the list of random TLLI to be removed (invalidated) from the GMM
must be defined with the
old-tlli invalidate tlli
command.
Related Commands:
The
gmm-message
configures the SGSN to discard (drop) the Attach-Request message received with a
random TLLI already in use
The
old-tlli invalidate tlli
command configures the random invalidate TLLI list.
Example
Set the timer for
2
seconds:
old-tlli hold-time 2