Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
autoconfirm ▀
Command Line Interface Reference, StarOS Release 18 ▄
3797
autoconfirm
Enables or disables confirmation for certain commands. This command affects the current CLI session only.
Important:
Use the
autoconfirm
command in the Global Configuration Mode to change the behavior for all
future CLI sessions.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] autoconfirm
no
Disables autoconfirm if it has been enabled.
Usage
When
autoconfirm
is enabled, certain commands ask you to answer yes or no to confirm that you want to
execute the command. When
autoconfirm
is disabled, the confirmation prompts never appear. Disabling
autoconfirm
in the Exec mode is active for the current CLI session only.
By default
autoconfirm
is enabled.
Important:
If commandguard is enabled, autoconfirm will disable commandguard.
Example
The following command enables command confirmation:
autoconfirm