Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (Q-S)
show sccp-network ▀
Command Line Interface Reference, StarOS Release 18 ▄
4895
show sccp-network
Displays SS7 Signaling Connection Control Part (SCCP) network configuration and status information.
Product
SGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show sccp-network { ntwk_index | all } [ status [ all | dpc ] ]
ntwk_index
Displays configuration and status information for the SSCP network configuration with the network index
specified as an integer from 1 through 12.
specified as an integer from 1 through 12.
all
Displays all available configuration and status information for all SSCP networks.
status all
Displays all status information for specified SCCP networks.
status dpc
Displays status information for the device in the SCCP network identified by the destination point-code
(DPC).
(DPC).
Usage
Use this command to display global SCCP statistics or to display SCCP statistics for a specified service or
network.
network.
Example
The following command displays global SCCP statistics:
show sccp-network all
The following command displays information for an SCCP network configuration with the network index of
1
:
show sccp-network 1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.