Cisco Cisco Packet Data Gateway (PDG)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
▀ ip server-ip-address
▄ Command Line Interface Reference, StarOS Release 18
5170
host-pool host_pool_name
: Specifies name of the host pool.
host_pool_name
must be an
alphanumeric string of 1 through 63 characters.
Usage
Use this command to specify an access ruledef to analyze user traffic based on IPv4 or IPv6 server address.
For uplink packets, this field matches the destination IP address in the IP header. For downlink packets, this
field matches the source IP address in the IP header.
For uplink packets, this field matches the destination IP address in the IP header. For downlink packets, this
field matches the source IP address in the IP header.
Example
The following command creates an IP ruledef for analyzing user traffic using IPv4 server address
10.1.1.1
:
ip server-ip-address = 10.1.1.1