Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (L-S)
▀ snmp mib
▄ Command Line Interface Reference, StarOS Release 18
5546
snmp mib
Enables or disables a specified SNMP Management Information Base (MIB).
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] snmp mib mib_name
no
Disables the specified MIB.
mib_name
Specifies a MIB by its name. You can find the currently supported MIBs by running the Exec mode
show
snmp server
command. Enter the MIB name as a text string exactly as displayed under “SNMP Agent Mib
Configuration”,
By default the STARENT-MIB is enabled.
By default the STARENT-MIB is enabled.
Usage
Use this command to enable or disable system support for an SNMP MIB.
Example
The following command enables the SNMP MIB entitled “CISCO-MOBILE-WIRELESS-SERVICE-MIB”.
snmp mib CISCO-MOBILE-WIRELESS-SERVICE-MIB