Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
▀ llc
▄ Command Line Interface Reference, StarOS Release 18
6044
llc
Configures the timers that control the data flow for the logical link control (LLC) sub-layer.
Important:
This command may be repeated as often as necessary to define the needed timers.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
llc { iov-ui-in-xid-reset | n201u-max { sapi11 pkt-size | sapi3 pkt-size | sapi5 pkt-size
| sapi9 pkt-size } | nu-overflow-detection high-watermark high_num low-watermark low_num
increment-oc| pdu-lifetime secs | random-value-in-iov-ui [ negotiation-failure-action {
fallback-to-default-iovui | reject } ] | reset-vur | t200 sapi1 time | t200 [ sapi11 time
| sapi3 time | sapi5 time | sapi7 time | sapi9 time ] | uplink-pdu-len-validation }
| sapi9 pkt-size } | nu-overflow-detection high-watermark high_num low-watermark low_num
increment-oc| pdu-lifetime secs | random-value-in-iov-ui [ negotiation-failure-action {
fallback-to-default-iovui | reject } ] | reset-vur | t200 sapi1 time | t200 [ sapi11 time
| sapi3 time | sapi5 time | sapi7 time | sapi9 time ] | uplink-pdu-len-validation }
default llc { iov-ui-in-xid-reset | n201u-max { sapi11 | sapi3 | sapi5 | sapi9 } | nu-
overflow-detection | pdu-lifetime | random-value-in-iov-ui | reset-vur | T200 [ sapi1 |
sapi11 | sapi3 | sapi5 | sapi7 | sapi9 ] | uplink-pdu-len-validation }
overflow-detection | pdu-lifetime | random-value-in-iov-ui | reset-vur | T200 [ sapi1 |
sapi11 | sapi3 | sapi5 | sapi7 | sapi9 ] | uplink-pdu-len-validation }
no llc { iov-ui-in-xid-reset | nu-overflow-detection | random-value-in-iov-ui | reset-vur
| uplink-pdu-len-validation }
| uplink-pdu-len-validation }
default
Resets the configuration parameter to the default values.
no
Disables a defined configuration parameter and returns to the SGSN default.
iov-ui-in-xid-reset
This keyword makes it possible for the operator to configure whether or not to send IOV-UI in an XID-
RESET. This is useful when the MS is not setup to accept IOV-UI (for example, MS sends Attach/RAU
Requests with cksn=7) and including IOV-UI in the XID-Reset would result in Attach/RAU failure.
Default: Enabled
RESET. This is useful when the MS is not setup to accept IOV-UI (for example, MS sends Attach/RAU
Requests with cksn=7) and including IOV-UI in the XID-Reset would result in Attach/RAU failure.
Default: Enabled