Cisco Cisco Packet Data Gateway (PDG)
HA Service Configuration Mode Commands
ip context-name ▀
Command Line Interface Reference, StarOS Release 18 ▄
6263
ip context-name
Specifies name of the destination context to be applied to the subscribers.
This configuration overrides the local subscriber configuration as well as the return attributes sent by RADIUS. All calls
coming to this HA service are assigned this destination context; the IP address is allocated from the specified IP pool or
group that is configured in the context specified in the service.
coming to this HA service are assigned this destination context; the IP address is allocated from the specified IP pool or
group that is configured in the context specified in the service.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
ip context-name name
{ default | no } ip context-name
default
Sets the default value assigned for context-name.
no
Removes the current assigned context from the subscriber’s data.
name
Specifies the name of the context to assign the subscriber to once authenticated.
name
must be an
alphanumeric string from 1 through 79 characters.
Usage
Set the name of the destination context to be applied to the subscribers.
Example
The following command configures the IP context name of
sampleName
:
ip context-name sampleName