Cisco Cisco Packet Data Gateway (PDG)

Seite von 9109
LTE Handover Restriction List Configuration Mode Commands   
▀  forbidden 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
7116 
   
forbidden 
Configures the handover restriction lists provided to eNodeBs where handover restrictions are enforced for UEs. 
Product
 
MME 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration 
configure > lte-policy > ho-restrict-list list_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(ho-restrict-list)# 
Syntax
 
[ no ] forbidden { inter-rat { all | cdma2000 | geran | utran } | location-area plmnid id 
| tracking-area plmnid id } 
default forbidden inter-rat 
default forbidden inter-rat
 
Removes the forbidden inter-RAT configuration from the LTE policy. 
no
 
Removes the forbidden configuration from the LTE policy. 
inter-rat { all | cdma2000 | geran | utran }
 
Specifies that one or all Radio Access Technology (RAT) handovers are to be prohibited for UEs associated 
with the LTE policy. 
all
: Specifies that all inter-RAT handovers are to be prohibited for UEs associated with the LTE policy. 
cdma2000
: Specifies that all CDMA2000 handovers are to be prohibited for UEs associated with the LTE 
policy. 
geran
: Specifies that all GSM EDGE Radio Access Network (GERAN) handovers are to be prohibited for 
UEs associated with the LTE policy. 
utran
: Specifies that all UMTS Terrestrial Radio Access Network (UTRAN) handovers are to be prohibited 
for UEs associated with the LTE policy. 
location-area plmnid id 
 
Specifies that handovers to 3G location area codes defined through this keyword and subsequent 
configuration mode are to be prohibited for UEs associated with the LTE policy. Enters the LTE Forbidden 
Location Area Configuration Mode. 
id
 must be a valid PLMN ID expressed as an integer comprised of an 
MCC (Mobile Country Code) and MNC (Mobile Network Code) [five-digit minimum, six-digit maximum]. 
Important:
  Up to 16 forbidden location area PLMN IDs can be configured per handover restriction list.